|
|
|
|
< Back to search results
|
|
|
Solar Force Piston Pump 3040 Series |
Use Solar-Electric Power for water lift or pressurizing from shallow water sources. Provides as much as 5600 Gallons per day (21,000 ltrs.) pushing as high as 230 Feet (70m) or 100 PSI (7 kg/sq. cm)
Solar Force Piston Pump draws water from a shallow well, spring, pond, river or tank. It can push water uphill and over long distances for home, village, irrigation or livestock uses. It can use power directly from a photovoltaic array, or from storage batteries, to fill a storage tank or to pressurize water.
FEATURES
- Uses less power than ANY other pump in its range
- Reduces power system cost by 25-75% compared to centrifugal or AC pumps
- Starts pumping in low light conditions
- DC version is most efficient. AC version uses a low-surge PM motor that greatly reduces starting surge, inverter size, and wire size requirements (when compared to conventional AC pumps).
- Proven design with a 20-year life expectancy. Simple to maintain with common tools (2-6 yr. maintenance interval)
- Good Tolerance for Dirt and Dry Run
- Mechanical Drive allows engine or hand-lever backup
- Illustrated Instruction Manual makes it easy for anyone to install and service, with no previous experience.
Suction Capacity
25 vertical feet (7.6m) at sea level. Subtract 1 foot for every 1000 ft. elevation (1m for every 1000m). Suction capacity may be further limited by intake pipe friction or gasses in water. Intake piping should be minimum 1 inch (3010, 3020 models) or minimum 1 1/4 inch (3040). For best reliability, place the pump as close to the water source as possible.
CONSTRUCTION
- Cast iron body
- Brass cylinder and valve seats
- Leather cup piston seals
- Neoprene valve seals
- Oil-bath crankcase with PTFE oil additive
- Gear (timing) belt drive on PV models
- Standard V-belt on B models
- Pressure relief valve
- Permanent Magnet DC Motor
SYSTEM REQUIREMENTS
- Solar-Direct Systems: Chart indicates power (watts) required at the pump. The rated power of the PV array must exceed this number by 20% or more. A pump controller (linear current booster) is required for the pump to start and run in varying light conditions. A solar tracker may be used to increase daily yield (40-55% in summer).
- Pressurizing Systems: Battery power system, pressure switch, and pressure tank of minimum 60 gallon (230 l) size (captive-air tank, available locally)
- Foot valve (if pump is placed higher than water source)
ACCESSORIES
- Foot Valve FV-3000 (1-1/4 inch) required if pump is placed higher than water source
- Pressure Switch: Heavy Duty DC rated, for pressurizing systems
- Surge Tank: Absorbs pulsation if long piping is required between pump outlet and tank (Included with PV models)
- Seal & Gasket Set : Spare gaskets, rod and valve seals, two sets of piston seals, and a belt
- Long-Term Parts Kit: The above, plus a second belt, motor brushes, cylinder sleeve, 2 oil changes
- Easy Installation Kit includes: Pressure Switch, Pressure Gauge, Check , Drain & Shut-Off Valves, & Tank Tee (manifold)
FITTINGS
- Intake: 1 1/4 inch female pipe thread
- Outlet: 1 inch female pipe thread
DIMENSIONS
- 22 X 13 X 16 in. High (56 X 33 X 41 cm)
- With Surge Tank, 26 in. High (60 cm)
- Weight, max. 80 lbs (36 kg)
WARRANTY
2 years against defects in materials and workmanship
|
| Item # |
Description |
Price |
|
| WP14278 |
Solar Force Piston Pump 3040-12B DC |
$1,475.00 |
Add
to Cart
|
| WP14279 |
Solar Force Piston Pump 3040-12PV PV Direct |
$1,695.00 |
Add
to Cart
|
| WP14280 |
Solar Force Piston Pump 3040-24B DC |
$1,445.00 |
Add
to Cart
|
| WP14281 |
Solar Force Piston Pump 3040-24PV PV Direct |
$1,700.00 |
Add
to Cart
|
| WP14282 |
Solar Force Piston Pump 3040-48B DC |
$2,010.00 |
Add
to Cart
|
| WP14283 |
Solar Force Piston Pump 3040-48PV PV Direct |
$1,600.00 |
Add
to Cart
|
|
